Custom Square Neck Layered Strap Cami Bra Top - OEM Wholesale Supply

Model: hc2026093086

Item specifics

Product Type: Longline cami bra top with built-in bra line

Reference Design: Layered strap cami with square neckline

Signature Detail: Double-layer straps with a contrast inner layer showing through

Neckline and Strap: Square neckline, two wide layered straps

Hem and Length: Longline body finishing at the lower rib

Back Construction: Deep U back with layered straps meeting at the centre

Fabric Development: Composition and weight confirmed on approved swatch

Colour Development: Outer and inner layer shades matched to Pantone reference

Logo & Label Options: Chest print, woven label or silicone print

Size Grading: Graded from your size chart or developed with our block

MOQ: MOQ from 100 pcs / style.

OEM / ODM Service: OEM from your tech pack; ODM from this reference design

Review

Description

Product Overview

This reference design is a longline cami bra top with a square neckline and two wide straps built from a doubled layer, so a second colour shows along the strap edge. The body runs to the lower rib and the back opens into a deep U where the straps meet. Three colourways are shown with different inner-layer tones. The style is aimed at brands building layered studio and training tops. Our custom tank top line covers this construction family.

Product Highlights

The points below are the construction details visible on the reference sample. Inner-layer colour, strap width and body length all stay open until your specification is approved.

Layered strap build

Each wide strap is made from two layers so the inner tone shows at the edge.

Square neckline

The square neckline sits flat across the chest with a clean bound finish.

Deep U back

The back drops into a wide U shape where both straps meet.

Longline body

The body continues past the underbust and finishes at the lower rib.

Development & Customization

Strap build, inner-layer colour and body length are the three variables that shape this style. The cards below separate what is confirmed at sample stage from what stays open until your swatch and artwork are approved. Our manufacturing capacity page explains how layered garments are scheduled between cutting and sewing lines.

Fabric and layer options

Outer body, inner strap layer and any bra lining are selected against your brief and signed off on a swatch. Weight and recovery are recorded so the layered strap keeps its edge. Options are listed on the women sportswear fabric selection page.

Fit and pattern development

Square neck width, strap width, U back depth and body length are set on the pattern. The block can be graded from your size chart or developed from this reference design in ODM mode.

Colour and layer matching

Outer body and inner layer shades are matched to separate Pantone references and approved on strike-offs. Contrast between the two layers is checked on the sewn sample, because seam allowances shift how much of the inner tone is visible.

Logo and label placement

Chest print, woven labels, silicone prints and branded elastic are available. Position and size follow your artwork file, and the approved placement is carried on the sample.

Sampling checkpoints

Before bulk, the sample is checked on the body and after wash. The full flow is set out in our women sportswear sample policy.

Strap layer alignment at the edge
Square neckline width and depth
U back depth on the fit model
Wash test and shade retention

Detail Images

Four references are shown below, covering the three colourways and one second fit reference for the layered strap construction.

Layered strap cami bra top in light blue, front view — Pink body with blue-grey inner layer

Layered strap cami bra top in grey, front view — Light blue body with cream inner layer

Layered strap cami bra top in pink, fitted view — Heather grey body with white inner layer

Layered strap cami bra top in light blue, second fit — Second fit reference, front view

Product Specifications

Item	Detail
Product type	Longline cami bra top with built-in bra line
Reference design	Layered strap cami with square neckline
Signature detail	Double-layer straps with the inner tone exposed at the edge
Neckline and straps	Square neckline, two wide layered shoulder straps
Hem and length	Longline body finishing at the lower rib
Back construction	Deep U back with both straps meeting at the centre
Colourways shown	Pink with blue-grey inner, light blue with cream inner, heather grey with white inner
Fabric development	Composition, weight and recovery confirmed on approved swatch
Colour development	Outer and inner layer shades matched to Pantone references
Logo and label options	Chest print, woven label or silicone print to your artwork
MOQ	MOQ from 100 pcs / style.

OEM / ODM & Next Step

Send your tech pack, colour pairing or a reference image, and we will come back with a development plan and a counter sample offer.

Tell us your target quantity, size range and colourway. HUCAI Sportswear sources fabric and trim, develops layered patterns, samples, runs bulk production and controls quality for women's sportswear labels. Layer pairing is confirmed on the sewn sample before cutting starts.

Request OEM quote Start ODM development